Although we don't believe in timing the market or panicking over market movements, we do like to keep an eye on big changes -- just in case they're material to our investing thesis.
What: Shares of Titan Machinery (NASDAQ: TITN ) dropped as much as 18% today after releasing earnings.
So what: Fiscal fourth-quarter revenue rose 29.2% from a year ago to $784.5 million, beating estimates of $694.8 million. But earnings per share were just $0.73, $0.19 below estimates, and the company's guidance of 2014 earnings of $2.00 to $2.30 was well below the $2.59 estimate. �
Now what: Gross margin fell to 13.3% in the fourth quarter from 15.3% a year ago, which is why earnings fell short of expectations. The construction business accounted for much of that decline, and the company will work to reverse the trend in 2014. This isn't good news for the company or the stock, but at 11 times forward earnings (on the low end), the stock isn't a bad value, and if the economy picks up, so should earnings.
Interested in more info on Titan Machinery? Add it to your watchlist by clicking here.�
Hot Warren Buffett Companies To Watch In Right Now: Katy Industries Inc (KATY)
Katy Industries, Inc. (Katy) is a manufacturer, importer and distributor of commercial cleaning and storage products. The Company�� commercial cleaning products are sold primarily to janitorial/sanitary and foodservice distributors that supply end users, such as restaurants, hotels, healthcare facilities and schools. The Company�� storage products are primarily sold through home improvement and mass market retail outlets. Continental Commercial Products, LLC (CCP) is its wholly owned subsidiary and includes as divisions all of its business units. The Company�� business units are Continental, Contico, Container, Gemtex, Glit and Wilen. On October 4, 2011, the Company sold all assets and certain liabilities related to the DISCO division of CCP to DISCO Acquisition Corp. In February 2014, Katy Industries Inc completed the acquisition of Fort Wayne Plastics, Inc.
The Continental business unit is a plastics manufacturer and an importer and distributor of products for the commercial janitorial/sanitary maintenance, industrial and food service markets. Continental products include commercial waste receptacles, buckets, mop wringers, janitorial carts, and other products designed for commercial cleaning and food service. Continental products are sold under the brand names, such as Continental, Kleen Aire, Huskee, SuperKan, King Kan, Unibody, Tilt-N-Wheel, Wall Hugger, Collossus, Corner��Round, Rountop, Swingline, Kleen Tech and Structo Tuff.
The Contico business unit is a plastics manufacturer and distributor of home and tool storage products, sold primarily through home improvement and mass market retail outlets. Contico products include plastic home storage units, such as domestic storage containers, tool boxes, shelving and hard plastic gun cases and are sold under the brand names Contico and Tuffbin. Contico is a registered trademark used under license from Contico Manufacturing Limited.
The Container business unit is a plastics manufacturer and distributor ! of industrial storage drums and pails for commercial and industrial use. Products are sold under the Contico and Contico Container brand names.
The Gemtex business unit is a manufacturer and distributor of resin fiber disks and other coated abrasives for the original equipment manufacturer (OEM), automotive, industrial and home improvement markets. Gemtex products are sold under the brand names Trim-Kut and Grind R.
The Glit business unit is a manufacturer and distributor of non-woven abrasive products for commercial and industrial use and also supplies materials to various OEMs. Glit non-woven products include floor maintenance pads, hand pads, scouring pads, specialty abrasives for cleaning and finishing, growth medium and roof ventilation products. These products are sold primarily in the commercial sanitary maintenance, food service, industrial and construction markets under the brand names, such as Glit, Kleenfast, Glit/Microtron, Fiber Naturals, Blue Ice, Brillo, Cyclone, Cyclone D, Sponge Pro, Wipe Clean Pro, Joey, Jackeroo, Buckaroo, Cocopad, Safire and WalnutPad. Brillo is a registered trademark used under license from Armaly Brands, Inc. and BAB-O is a registered trademark used under license from Fitzpatrick Bros., Inc.
The Wilen business unit is a manufacturer, importer and distributor of professional cleaning products that include mops, brooms, brushes and plastic cleaning accessories. Wilen products are sold primarily through commercial sanitary maintenance, industrial and food service markets, with some products sold through consumer retail outlets. Products are sold under the brand names, such as Wilen, Wax-o-matic, Rototech, ErgoWorx and Derma-Tek.
Advisors' Opinion:- [By Chris Mydlo]
The guru, Mario Gabelli, purchased 724,729 shares of Katy Industries (KATY). According to the 13D filed with the SEC on March 21, 2014, Gabelli is deemed to have beneficial ownership of the securities owned by Gabelli Funds, GAMCO, Teton Advisors and MJG Associates. The total amount of shares owned is 1,711,045, representing 21.52% of the shares outstanding. Katy engages in the manufacture, import and distribution of commercial cleaning and storage products for commercial janitorial/sanitary maintenance, industrial, foodservice, mass merchant retail and home improvement markets in the U.S., Canada and Europe.
Hot Machinery Stocks To Buy For 2014: Xylem Inc (XYL)
Xylem Inc. (Xylem), formerly ITT WCO, Inc., incorporated on May 4, 2011, is a provider of equipment and service for water and wastewater applications with a portfolio of products and services addressing the full cycle of water, from collection, distribution and use to the return of water to the environment. It operates in two segments: Water Infrastructure and Applied Water. The Water Infrastructure segment focuses on the transportation, treatment and testing of water, offering a range of products, including water and wastewater pumps, treatment and testing equipment, and controls and systems. Key brands in this segment include Flygt, Wedeco, Godwin Pumps, WTW, Sanitaire, AADI and Leopold. The Applied Water segment encompasses the uses of water and focuses on the residential, commercial, industrial and agricultural markets. The segment�� products include pumps, valves, heat exchangers, controls and dispensing equipment. Key brands in this segment include Goulds Water Technology (Goulds), Bell & Gossett, AC Fire, Standard, Flojet, Lowara, Jabsco and Flowtronex. The Company sells its products in more than 150 countries through a distribution network consisting of its direct sales force and independent channel partners. On October 31, 2011, ITT Corporation completed Spin-off of Xylem, formerly ITT�� water equipment and services businesses. The Spin-off was completed pursuant to the Distribution Agreement, dated as of October 25, 2011, among ITT, Exelis Inc. (Exelis) and Xylem. In July 2012, it acquired MJK Automation A/S. In March 2013, it acquired MultiTrode Pty Ltd.
Water Infrastructure
Water Infrastructure involves the process that collects water from a source and distributes it to users, and then returns the wastewater to the environment. Water Infrastructure serves three applications: transport, treatment and test of water and wastewater for two types of customers: public utilities and industrial facilities. The Transport application includes all of the equipment and s! ervices involved in the movement of water from sources, such as oceans, lakes, rivers and ground water, to treatment facilities, and then to users. It also includes the movement of wastewater from the point of use to a treatment facility and then back into the environment. The Company serves the equipment markets, such as water and wastewater submersible pumps, monitoring controls, and application solutions. With operations on six continents, it also has dewatering rental fleet, serviced with the Company�� Flygt and Godwin brands. In its Water Infrastructure Segment, Transport accounted for approximately 73% of its consolidated revenue during the year ended December 31, 2011. Flygt is the manufacturer of submersible pumps, mixers, and aeration equipment for use in environments, such as water and wastewater treatment, raw water supply, abrasive or contaminated industrial processes, mining and crop irrigation. Flygt products have applications in various markets, including wastewater lift stations, water and wastewater treatment facilities, pressurized sewage systems, oil and gas, steel, mining and leisure markets. Customers include public utility wastewater and clean water treatment facilities, oil and gas platforms, and steel manufacturing companies.
Godwin Pumps is engaged in pump manufacturing. It manufactures, sells, rents and services products that are customized to the specific needs of its clients. Godwin Pumps��products include the fully automatic self-priming Dri-Prime pump, a range of Sub-Prime electric and Heidra hydraulic submersible pumps, Wet-Prime gasoline-powered contractor pumps and a line of generators and portable light towers. Godwin products are primarily used in construction, disaster recovery, flooding, heavy industry, marine use, mining, oil, gas and chemical extraction, refineries, temporary fire protection and water and wastewater transport. Customers include industrial plants, construction contractors, public utility wastewaters and clean water treatment and tr! ansportat! ion facilities, oil, gas and chemical drilling outfits, and refineries. Godwin�� fleet of equipment is rented through 33 United States branches and a global network of distributors. The Treatment application includes equipment and services that treat both water for consumption and wastewater to be returned to the environment. Leopold is the Company�� filtration brand. Disinfection systems, both ultraviolet (UV) and ozone oxidation, treat both public utility drinking water and wastewater, as well as industrial process water, and are provided through its WEDECO brand. Biological treatment systems are key to the treatment of solids in wastewater plants, which is provided through its Sanitaire brand. In its Water Infrastructure Segment, Treatment accounted for approximately 18% of its consolidated net sales in 2011.
The Company�� Sanitaire brand provides biological wastewater treatment solutions for public utility and industrial applications. Sanitaire�� offering includes diffused aeration, sequencing batch reactors, drum filters and state-of-the-art controls. Sanitaire is a brand in diffused aeration, which is a process that introduces air into a liquid, providing an aerobic environment for degradation of organic matter. Principal Sanitaire customers are public utility and industrial wastewater treatment facilities. WEDECO develops chemical-free and environmentally friendly water treatment technologies, including ultraviolet light and ozone systems. There are over 250,000 installed WEDECO systems for UV disinfection and ozone oxidation globally in private, public utility and industrial locations. Customers include public utility wastewater and clean water treatment facilities, power plants, pulp and paper mills, food products manufacturers and aquaculture facilities. Leopold is a gravity media filtration and clarification solutions for the water and wastewater industry. Nova Analytics, its served market is focused on water and the environment for quality levels throughout the water in! frastruct! ure loop.. Analytical systems are applied in three primary ways: in the field, in a facility laboratory, or real time, online monitoring in a treatment facility process. In its Water Infrastructure Segment, Test accounted for approximately 9% of its consolidated net sales in 2011.
In wastewater treatment facilities, WTW-branded systems monitor parameters, such as dissolved oxygen, pH, and turbidity throughout the water process. WTW�� product offering includes meters, sensors, data-loggers, photometers and software. Aanderaa Data Instruments AS (AADI) offers sensors, instruments and systems for measuring and monitoring in environments, such as rivers, oceans and the polar regions through networked systems using wireless technology that monitors temperature, salinity, oxygen, turbidity, current and waves for ecosystem health. The main market areas are marine transportation, environmental and ocean research, oil and gas, aquaculture, road and traffic, and construction. Oceanography International Corporation (OI Analytical) provides products used for chemical analysis. The Company develops, manufactures, sells, and services analytical instruments that detect, measure, analyze, and monitor chemicals in liquids, solids, and gases. Yellow Springs Instrument Company (YSI) develops and manufactures sensors, instruments, software and data collection platforms for environmental and coastal water quality monitoring and testing. YSI also offers life sciences products, including biochemical analyzers for bioprocess monitoring, food and beverage processing, and sports physiology. The main market areas are marine transportation, environmental and ocean research, oil and gas, aquaculture, road and traffic, and construction.
Applied Water
Applied Water encompasses all the uses of water. Its served market consists of the main uses of global water: Building Services, Industrial Water and Irrigation. The Building Services is defined by four main uses of water in building services ! applicatio! ns, such as in residential homes and commercial buildings, including offices, hotels, restaurants and malls. The first is the supply of potable water for consumption, such as for drinking and hygiene. The Goulds brand offers pumps and boosting systems utilized within buildings, sourcing water from distribution networks or from wells. The second application is wastewater removal with sump and sewage pumps. The third application is in heating, ventilation and air conditioning (HVAC), where Bell & Gossett specializes in pumps and valves that are used in water-based heating and cooling systems. The fourth water-related building service area is fire protection, where its AC Fire brand supplies full pump systems for emergency fire suppression. In Europe, Lowara is a brand in the commercial and residential water market with applications in the four main uses of water. In its Applied Water Segment, Building Services accounted for approximately 51% of its consolidated net sales in 2011.
The Company�� Goulds brand supplies vertical multistage pumps to boost pressure for purposes , such as circulating water through a manufacturing facility to cool machine tools. Its Lowara brand focuses on water treatment, industrial washing equipment and machine tool cooling. The Standard brand delivers heat exchangers for combined heat and power (CHP) applications within power generation plants. It also provides applications, such as flexible impeller pumps for wine processing facilities served by its Jabsco brand, and water-based detergent dispensing and water circulation within car washes served by Flojet and Goulds air-operated diaphragm and end suction pumps. In its Applied Water Segment, Industrial Water accounted for approximately 42% of its consolidated net sales in 2011. The irrigation business consists of irrigation-related equipment and services associated with bringing water from a source to the plant or livestock need, including hoses, sprinklers, center pivot and drip irrigation. The Company focuses ! on the pu! mps and boosting systems that supply this ancillary equipment with water. Its Goulds brand brings mixed flow pumps, and its Flowtronex group specializes in equipment solutions, such as the Hydrovar boosting system, which incorporates monitoring and controls. Its Lowara brand also produces pumps for agriculture applications and irrigation of gardens and parks. In its Applied Water Segment, Irrigation accounted for approximately 7% of the Company�� consolidated net sales in 2011.
Advisors' Opinion:- [By Ben Levisohn]
Stocks received a respite from the selling today as Michael Kors�(KORS), Yum Brands (YUM),�Merck�(MRK),�Pfizer�(PFE) and�Xylem�(XYL) gained.
- [By Jim Jubak]
I wouldn't exactly call it super enthusiastic guidance, but this quarter, when so few companies have anything good to say about their business for the fourth quarter, even Xylem's (XYL) tepid enthusiasm stands out.
- [By Holly LaFon]
Xylem Inc. (0.7%) (XYL)(XYL - $36.42 - NYSE) is a global leader in the design, manufacturing, and application of highly engineered technologies for the transportation, treatment, and testing of water. The company is expected to benefit from favorable long term fundamentals in the water industry, driven by scarcity, population growth, aging of the infrastructure, and the need to improve water quality. Further, with a large installed base of pumps and systems, the company is well positioned to increase aftermarket revenue, which currently represents roughly 40% of total revenues. Xylem's attractive business mix also generates strong cash flow, which is expected to support acquisitions, debt service, and dividend growth. Concerns regarding weakness in Europe and municipal spending levels in the U.S. remain, although we believe the long term fundamentals outweigh these concerns. From Mario Gabelli (Trades, Portfolio)'s Gabelli Asset Fund's first quarter 2014 shareholder commentary.Also check out: Mario Gabelli Undervalued Stocks Mario Gabelli Top Growth Companies Mario Gabelli High Yield stocks, and Stocks that Mario Gabelli keeps buying Currently 0.00/512345
Rating: 0.0/5 (0 votes)
- [By Marc Bastow]
Water and waste-water systems provider Xylem (XYL) raised its quarterly dividend 10% to 12.8 cents per share, payable on Mar. 19 to shareholders of record as of Feb. 19.
XYL Dividend Yield: 1.39%
Hot Machinery Stocks To Buy For 2014: Danaher Corp (DHR)
Danaher Corporation (Danaher) designs, manufactures and markets professional, medical, industrial and commercial products and services. The Company�� research and development, manufacturing, sales, distribution, service and administrative facilities are located in more than 50 countries. It operates in five segments: Test & Measurement; Environmental; Life Sciences & Diagnostics; Dental; and Industrial Technologies. In April 2011, the Company sold its Pacific Scientific Aerospace (PSA) business. On June 30, 2011, the Company acquired Beckman Coulter, Inc. (Beckman Coulter). In January 2012, the Company sold its Accu-Sort businesses. In February 2012, the Company sold its Kollmorgen Electro-Optical (KEO) business. During the year ended December 31, 2011, the Company acquired EskoArtwork, On February 6, 2012, L-3 Communications Holdings, Inc. acquired Kollmorgen Electro-Optical unit of the Company. In January 2013, the Company acquired Navman Wireless.
TEST & MEASUREMENT
The Company�� Test & Measurement segment is a provider of electronic measurement instruments and monitoring, management and optimization tools for communications and enterprise networks and related services. The segment�� products are used in the design, development, manufacture, installation, deployment and operation of electronics equipment and communications networks and services. Customers for these products and services include manufacturers of electronic instruments; service, installation and maintenance professionals; manufacturers who design, develop, manufacture and install network equipment, and service providers who implement, maintain and manage communications networks and services.
The Company�� business designs, manufactures, and markets a variety of compact professional test tools, thermal imaging and calibration equipment for electrical, industrial, electronic and calibration applications. These test products measure voltage, current, resistance, power quality, frequency, p! ressure, temperature and air quality. Typical users of these products include electrical engineers, electricians, electronic technicians, medical technicians, and industrial maintenance professionals. Its business also offers general purpose test products and video test, measurement and monitoring products used in electronic design, manufacturing and advanced technology development. The business��general purpose test products, including oscilloscopes, logic analyzers, signal sources and spectrum analyzers, are used to capture, display and analyze streams of electrical data. The Company sells these products into a variety of industries with electronic content, including the communications, computer, consumer electronics, education, military/aerospace and semiconductor industries.
Typical users include research and development engineers who use its general purpose test products to design, de-bug, monitor and validate the function and performance of electronic components, subassemblies and end-products. Its video test products include waveform monitors, video signal generators, compressed digital video test products and other test and measurement equipment used to enhance a viewer�� video experience. Typical users of these products include video equipment manufacturers, content developers and traditional television broadcasters. Products in this business are marketed under the FLUKE, TEKTRONIX, KEITHLEY, RAYTEK, FLUKE BIOMEDICAL, AMPROBE and MAXTEK brands.
The communications businesses offer network management solutions, handheld and fixed diagnostic equipment and security solutions, as well as related installation and maintenance services, for a range of private network applications, as well fixed and mobile communications systems. Typical users of the business��products include network engineers, installers, operators, and technicians. Its network management tools help network operators continuously manage network performance and optimize the utilization, uptime and servi! ce qualit! y of the network. Products in this business are marketed under the TEKTRONIX, FLUKE NETWORKS, ARBOR, VISUAL NETWORKS and AIRMAGNET brands.
Matco Tools manufactures and distributes professional tools, toolboxes and automotive equipment through independent mobile distributors, who sell primarily to professional mechanics under the MATCO brand. Hennessy Industries is a North American full-line wheel service equipment manufacturer, providing brake lathes, vehicle lifts, tire changers, wheel balancers, and wheel weights under the AMMCO, BADA and COATS brands. Typical users of these products are automotive tire and repair shops. Sales are generally made through its direct sales personnel, independent distributors, retailers, and original equipment manufacturers.
ENVIRONMENTAL
The Company�� Environmental segment provides products that help protect its water supply and air quality and serves two primary markets: water quality and retail/commercial petroleum. Danaher�� water quality business is engaged in water quality analysis and treatment, providing instrumentation and disinfection systems to help analyze and manage the quality of ultra pure, potable and waste water in residential, commercial, industrial and natural resource applications. Its water quality operations design, manufacture and market a range of analytical instruments, related consumables, and associated services that detect and measure chemical, physical, and microbiological parameters in ultra pure, potable and waste water as well as groundwater and ocean bodies; ultraviolet disinfection systems, which disinfect billions of gallons of municipal, industrial and consumer water every day in more than 35 countries, and industrial water treatment solutions, including chemical treatment solutions intended to address corrosion, scaling and biological growth problems in boiler, cooling water and industrial waste water applications, as well as associated analytical services. Typical users of its analytical in! struments! , ultraviolet disinfection systems, industrial water treatment solutions and related consumables and services include professionals in municipal drinking water and waste water treatment plants and industrial process water and waste water treatment facilities, third-party testing laboratories and environmental field operations. Its water quality business provides products under a variety of well-known brands, including HACH, HACH/LANGE, TROJAN TECHNOLOGIES and CHEMTREAT. Manufacturing facilities are located in North America, Europe, and Asia.
The Company has served the retail/commercial petroleum market through its Veeder-Root business. Gilbarco Veeder-Root is a provider of products and services for the retail/commercial petroleum market, including environmental monitoring and leak detection systems; vapor recovery equipment; fuel dispensers; point-of-sale and secure electronic payment technologies for retail petroleum stations; submersible turbine pumps, and remote monitoring and outsourced fuel management services, including compliance services, fuel system maintenance, and inventory planning and supply chain support. Typical users of these products include independent and Company-owned retail petroleum stations, high-volume retailers, convenience stores, and commercial vehicle fleets. The Company markets its retail/commercial petroleum products under a variety of brands, including GILBARCO, VEEDER-ROOT, and GILBARCO AUTOTANK. Manufacturing facilities are located in North America, Europe, Asia and Latin America. Sales are generally made through independent distributors and its direct sales personnel.
LIFE SCIENCES & DIAGNOSTICS
The Company�� diagnostics businesses offer a range of analytical instruments, reagents, consumables, software and services that hospitals, physician�� offices, reference laboratories and other critical care settings use to diagnose disease and make treatment decisions. Its life sciences businesses offer a range of research and clinical ! tools tha! t are used by scientists to study cells and cell components to gain a better understanding of complex biological matters. Pharmaceutical and biotechnology companies, universities, medical schools and research institutions use these tools to study the causes of disease, identify new therapies and test new drugs and vaccines. The diagnostics business consists of its core lab, acute care and pathology diagnostics businesses.
The Company�� core lab diagnostics business is a manufacturer and marketer of biomedical testing instrument systems, tests and supplies that are used to evaluate and analyze samples made up of body fluids, cells and other substances. The information generated is used to diagnose disease, monitor and guide treatment and therapy, assist in managing chronic disease and assess patient status in the hospital, outpatient and physician office settings. Its chemistry systems use electrochemical detection and chemical reactions with patient samples to detect and quantify substances of diagnostic interest in blood and other body fluids. Commonly performed tests include glucose, cholesterol, triglycerides, electrolytes, proteins and enzymes.
The Company�� immunoassay systems also detect and quantify chemical substances of diagnostic interest in body fluids, particularly in circumstances where more specialized diagnosis is required. Commonly performed immunoassay tests assess thyroid function, screen and monitor for cancer and cardiac risk and provide important information in fertility and reproductive testing. Its cellular analysis business includes hematology, flow cytometry and coagulation products. The business��hematology systems use principles of physics, optics, electronics and chemistry to separate cells of diagnostic interest and then quantify and characterize them, allowing clinicians to study formed elements in blood (such as red and white blood cells and platelets). The business also distributes coagulation products, which rely on clotting, chromogenic! and immu! nologic technologies to provide the detailed information that clinicians require to diagnose bleeding and clotting disorders and to monitor anticoagulant therapy. It also offer systems and workflow solutions that allow laboratories to automate a number of steps from the pre-analytical through post-analytical stages including sample barcoding/information tracking, centrifugation, aliquotting, storage and conveyance. These systems along with the analyzers above are controlled through laboratory level software that enables laboratory managers to monitor samples, results and lab efficiency.
The Company�� acute care diagnostics business is a provider of instruments and related consumables and services that are used in both laboratory and point-of-care environments to rapidly measure critical parameters, including blood gases, electrolytes, metabolites and cardiac markers. Typical users of these products include hospital central laboratories, intensive care units, hospital operating rooms and hospital emergency rooms. Its pathology diagnostics business is engaged in the anatomical pathology market, offering a suite of instrumentation and related consumables used across the entire workflow of a pathology laboratory. Its pathology diagnostics products include tissue embedding, processing and slicing (microtomes) instruments and related reagents and consumables; chemical and immuno-staining instruments, reagents, antibodies and consumables; slide coverslipping and slide/cassette marking instruments, and imaging instrumentation including slide scanners, microscopes, cameras and associated software. Typical users of these products include pathologists, lab managers and researchers. Its diagnostics business generally markets its products under the BECKMAN COULTER, LEICA BIOSYSTEMS, RADIOMETER and SURGIPATH brands. Manufacturing facilities are located in North America, Europe, Asia and Australia. The businesses sell to customers primarily through direct sales personnel and to a lesser extent through ! independe! nt distributors.
The Company�� microscopy business is a provider of professional microscopes designed to manipulate, preserve and capture images of, and enhance the user�� visualization of, microscopic structures. Its microscopy products include laser scanning (confocal) microscopes; compound microscopes and related equipment; surgical and other stereo microscopes; specimen preparation products for electron microscopy; and digital image capture and manipulation equipment. The Company also offers workflow instruments and consumables that help researchers analyze genomic, protein and cellular information. Key product areas include sample preparation equipment, such as centrifugation and capillary electrophoresis instrumentation and consumables; liquid handling automation instruments and associated consumables; flow cytometry instrumentation and associated antibodies and reagents; and particle characterization instrumentation. The business also offers genome profiling services. Researchers use the business��products to study biological function in the pursuit of basic research, therapeutic and diagnostic development. Typical users of these products include pharmaceutical and biotechnology companies, universities, medical schools and research institutions and in some cases industrial manufacturers.
The Company�� mass spectrometry business is a provider of high-end mass spectrometers. Mass spectrometry is a technique for identifying, analyzing and quantifying elements, chemical compounds and biological molecules, individually or in complex mixtures. Its products utilize various combinations of quadrupole, time-of-flight and ion trap technologies, and are typically used in conjunction with a third party liquid chromatography instrument. Its mass spectrometer systems are used in numerous applications, such as drug discovery and clinical development of therapeutics as well as in basic research, clinical testing, food and beverage quality testing and environmental testing. To s! upport it! s installations around the world, it provides implementation, validation, training, maintenance and support from its global services network. Typical users of its mass spectrometry products include molecular biologists, bioanalytical chemists, toxicologists, and forensic scientists, as well as quality assurance and quality control technicians. It also provides high-performance bioanalytical measurement systems, including microplate readers, automated cellular screening products and associated reagents, and imaging software. Typical users of these products include biologists and chemists engaged in research and drug discovery, who use these products to determine electrical or chemical activity in cell samples. Its life sciences business generally markets its products under the LEICA MICROSYSTEMS, BECKMAN COULTER, AB SCIEX and MOLECULAR DEVICES brands. Manufacturing facilities are located in Europe, Australia, Asia and North America.
DENTAL
The Company�� Dental segment is a provider of a range of consumables, equipment and services for the dental market, which encompasses the diagnosis, treatment and prevention of disease and ailments of the teeth, gums and supporting bone. Its dental businesses develop, manufacture and market dental consumables and dental equipment orthodontic bracket systems and lab products; impression, bonding and restorative materials; endodontic systems and related consumables; infection prevention products, and diamond and carbide rotary instruments. Typical customers and users of these products include general dentists, dental specialists, dental hygienists, dental laboratories and other oral health professionals, as well as educational, medical and governmental entities. Its dental products are marketed primarily under the KAVO, GENDEX, iCAT, INSTRUMENTARIUM DENTAL, SOREDEX, PELTON & CRANE, DEXIS, ORMCO, KERR, PENTRON, SYBRON ENDO and TOTAL CARE brands.
INDUSTRIAL TECHNOLOGIES
The Company�� Industrial Technologies segment ! designs a! nd manufactures components and systems that are typically incorporated by original equipment manufacturers (OEMs) and systems integrators for sale into a diverse set of applications and end-markets. The businesses in this segment also provide service and support, including helping customers with integration and installation and providing services to ensure performance and up-time. Danaher�� product identification business is a global provider of equipment and consumables for variable printing, marking and coding on a variety of consumer and industrial products. Its businesses design, manufacture, and market a variety of equipment used to print bar codes, date codes, lot codes, and other information on primary and secondary packaging. Its equipment can apply alphanumeric codes, logos and graphics to a range of surfaces at a variety of line speeds, angles and locations on a product or package.
EskoArtwork, the business is a service solutions provider for the digital packaging design and production market. Typical users of the product identification business��products include food and beverage manufacturers, pharmaceutical manufacturers, retailers and commercial printing and mailing operations. Its product identification products are primarily marketed under the VIDEOJET, LINX, FOBA and ESKOARTWORK brands. Manufacturing facilities are located in North America, Europe, Latin America, and Asia. The Company is a provider of electromechanical motion control solutions for the industrial automation and packaging markets. Its businesses provide a range of products including standard and custom motors; drives; controls, and mechanical components, such as ball screws, linear bearings, clutches/brakes, and linear actuators.
The products are sold in various precision motion markets, such as the markets for packaging equipment, medical equipment, robotics, circuit board assembly equipment, elevators and electric vehicles (such as lift trucks). Its motion products are marketed under a vari! ety of br! ands, including KOLLMORGEN, THOMSON, DOVER and PORTESCAP. Manufacturing facilities are located in North America, Europe, Latin America, and Asia. Its sensors and controls products include instruments that monitor, sense and control discrete manufacturing variables such as temperature, position, quantity, level, flow and time. Users of these products span a wide variety of manufacturing markets. Certain businesses included in this group also make and sell instruments, controls and monitoring systems used by the electric utility industry to monitor their transmission and distribution systems, as well as automatic identification solutions. The products are marketed under a variety of brands, including DYNAPAR, HENGSTLER, IRIS POWER, WEST, GEMS SENSORS, SETRA and QUALITROL. Sales are generally made through our direct sales personnel and independent distributors.
The Company�� defense business designs, manufactures, and markets energetic material systems. Typical users of these products include defense systems integrators and prime contractors. defense products are typically marketed under the PACIFIC SCIENTIFIC ENERGETIC MATERIALS COMPANY brand. The KEO business designs, develops, manufactures and integrates highly engineered, stabilized electro-optical/ISR systems that integrate into submarines, surface ships and ground vehicles. Jacobs Vehicle Systems (JVS) is a supplier of supplemental braking systems for commercial vehicles, selling JAKE BRAKE brand engine retarders for class 6 through 8 vehicles and bleeder and exhaust brakes for class 2 through 7 vehicles. Customers are primarily manufacturers of class 2 through class 8 vehicles, and sales are typically made through its direct sales personnel. Manufacturing facilities of its sensors and controls, defense and JVS businesses are located in North America, Latin America, Europe and Asia.
Advisors' Opinion:- [By Monica Gerson]
Danaher (NYSE: DHR) is projected to report its Q3 earnings at $0.83 per share on revenue of $4.62 billion.
Intuitive Surgical (NASDAQ: ISRG) is expected to post its Q3 earnings at $3.40 per share on revenue of $525.99 million.
- [By Todd Campbell]
If recent trends in employment and confidence continue, pent-up demand from consumers for dentistry could benefit a variety of other suppliers, too, including�Align Technology� (NASDAQ: ALGN ) ,�3M (NYSE: MMM ) , and�Danaher (NYSE: DHR ) .
Hot Machinery Stocks To Buy For 2014: Dover Corp (DOV)
Dover Corporation (Dover), incorporated in 1947, manufactures a range of specialized products and components and also offers related services and consumables. The Company operates in four segments: Communication Technologies, Energy, Engineered Systems, and Printing & Identification. In July 2011, it acquired Sound Solutions from NXP Semiconductors N.V. In September 2011, the Company sold Crenlo, LLC and Paladin Brands of Cedar Rapids. In October 2011, the Company acquired Oil Lift Technology. In November 2011, it acquired Advansor A/S. In November 2011, the Company realigned into four business segments, which includes Communication Technologies, Energy, Engineered Systems and Printing & Identification. In December 2011, the Company sold Heil Trailer International. In March 2012, the Company acquired Maag Group (Maag).
Communication Technologies
Dover Communication Technologies is engaged in the design and manufacture of products and components in the communications, life sciences, aerospace/industrial, defense, and telecommunication/other markets. The Company�� Communication Technologies focuses on markets, such as life sciences, aerospace/industrial, defense and telecommunication/other. Communication Technologies��products are manufactured primarily in North America, Europe and Asia. Its businesses serves the communications market design, manufacture and assemble micro-acoustic audio input and output components for use principally in personal mobile handsets. Life sciences businesses serves the life sciences market manufacture advanced miniaturized receivers and electromechanical components for use in hearing aids, connectors for use in a variety of medical devices and bio processing applications, and specialized components for use in implantable devices and medical equipment. Its aerospace/industrial businesses serves the aerospace/industrial markets manufacture precision engineered components and aftermarket parts across a range of market applications. In the commerci! al aerospace market, its businesses design and manufacture specialty hydraulics, fasteners, bearings, switches and filters sold to both original equipment manufacturers (OEMs) and as aftermarket products. It also design and manufacture frequency control components, electromechanical switches, multi-layered capacitors, filters and quick disconnect couplings serving the general industrial markets. Its defense businesses serves the defense market manufacture specialty hydraulics, mechanical and frequency control communication components, serving shipboard applications, strategic mission critical parts on key Airborne programs and Command and Control communications. Its telecommunication/other businesses serves the telecommunication/other markets manufacture frequency control components for wired and wireless network base station communications that ensure precise signal timing and filters for non-interrupted access across high speed networks.
Energy
The Company�� Energy segment serves the oil, gas and power generation industries. It consists of lines of business, which include drilling, production and downstream. The drilling businesses serves the drilling market design and manufacture products, including long-lasting polycrystalline diamond cutters (PDCs) for applications in down-hole drilling tools and quartz pressure transducers and hybrid electronics used in down-hole tools and monitoring devices. Its production businesses serves the production market design and manufacture products and components that facilitate the extraction and movement of fuel from the ground, including steel sucker rods, down-hole rod pumps, progressive cavity pumps and drive systems, plunger lifts, and accessories used in artificial lift applications in oil and gas production; pressure, temperature and flow monitoring equipment used in oil and gas exploration and production applications, and control valves and instrumentation for oil and gas production. In addition, these businesses manufacture vario! us compre! ssor parts that are being used in the natural gas production, distribution and oil refining markets; and winches, hoists, gear drives, swing drives, auger drives, slewing ring bearings, hydraulic pump and electronic monitoring solutions for energy, infrastructure and recovery markets worldwide. Its downstream businesses serve the downstream market produce systems and products that support transportation and handling of fuel, hazardous liquids and dry-bulk commodities. Vehicle fuel dispensing products include conventional, vapor recovery, and clean energy (liquid petroleum gas (LPG), compressed natural gas, and Hydrogen) nozzles, swivels and breakaways, as well as tank pressure management systems. Products manufactured for the transportation, storage and processing of hazardous liquid and dry-bulk commodities include relief valves, loading/unloading angle valves, rupture disc devices, actuator systems, level measurement gauges, swivel joints, butterfly valves, lined ball valves, aeration systems, industrial access ports, manholes, hatches, collars, weld rings and fill covers. In addition, it offer bearings, bearing isolators, seals and remote condition monitoring systems that are used for rotating machinery applications, such as turbo machinery, motors, generators and compressors used in energy, utility, marine and other industries.
Engineered Systems
Dover Engineered Systems is engaged in the fluids systems, refrigeration and food equipment, waste and recycling, and industrial markets. Dover Engineered Systems combines its engineering technology, product advantages, and applications to address market needs and requirements.
The Fluid Solutions platform designs and manufactures pumps, compressors, and chemical proportioning and dispensing products. The pumps and compressors are used to transfer liquid and bulk products and are sold to a wide variety of markets, including the refined fuels, LPG, pulp and paper, wastewater, food/sanitary, military, transportation and ! chemical ! process industries. The pumps include centrifugal, reciprocating (double diaphragm) and rotary pumps that are used in demanding and specialized fluid transfer process applications. The chemical portioning and dispensing systems are used to dilute and dispense concentrated cleaning chemicals and are sold to the food service, health care, supermarket, institutional, school, building service contractor and industrial markets. In addition, the platform manufactures copper-brazed compact heat exchangers, and designs software for heating and cooling substations. Fluid Solutions products are manufactured in the United States, South America, Asia and Europe. Its refrigeration and food equipment businesses manufacture refrigeration systems, refrigeration display cases, walk-in coolers and freezers, electrical distribution products and engineering services, commercial foodservice equipment, cook-chill production systems, custom food storage and preparation products, kitchen ventilation systems, conveyer systems, beverage can-making machinery, and packaging machines used for meat, poultry and other food products. The waste and recycling business in the solid waste management market provides products and services for the refuse collection industry and for on-site processing and compaction of trash and recyclable materials. Products are sold to municipal customers, national accounts and independent waste haulers through a network of distributors and directly in certain geographic areas. The Company also serves the vehicle service and industrial automation markets, providing a range of products and services that are utilized in vehicle services, maintenance, washing, repair and modification. The businesses in the industrial automation market provide a range of modular automation components including manual clamps, power clamps, rotary and linear mechanical indexers, conveyors, pick and place units, glove ports and manipulators as well as end-of-arm robotic grippers, slides and end effectors. These products serve a ra! nge of ma! rket, including food processing, packaging, paper processing, medical, electronic, automotive, nuclear, and general industrial products. These products are produced in the North America, Europe and Asia.
Printing & Identification
Dover Printing & Identification is a supplier of precision marking and coding, dispensing, printing, soldering, coating, inspection and testing equipment and related consumables and services. It provides its services in fast moving consumer goods (FMCG), industrial, and electronics.
FMCG businesses serves this market primarily design and manufacture marking and coding products used for printing variable information, such as date codes and serial numbers on food, beverage, consumer goods, and pharmaceutical products. Its industrial products used by the industrial market are primarily marking and coding, bar code and portable printers, and fluid dispensing related products serving a number of industrial end markets, including aerospace, cable, military, material packaging, industrial assembly, and medical devices. Additional products include a range of marking solutions leveraged for secondary packaging, such as cartons and pallets for use in warehouse logistics operations, and bar code printers and portable printers.
Advisors' Opinion:- [By Monica Gerson]
Dover (NYSE: DOV) is expected to report its Q1 earnings at $1.01 per share on revenue of $1.87 billion.
Pepsico (NYSE: PEP) is estimated to report its Q1 earnings at $0.75 per share on revenue of $12.40 billion.
- [By Richard Moroney, Editor, Dow Theory Forecasts]
Dover (DOV), a maker of specialized industrial products and manufacturing equipment, is being initiated as a Long-Term Buy. Dover announced a 7% hike to its quarterly dividend in August, marking 58 straight years of increases.
Hot Machinery Stocks To Buy For 2014: GT Advanced Technologies Inc (GTAT)
GT Advanced Technologies Inc., incorporated on September 27, 2006, is diversified technology company with crystal growth equipment and solutions for the global solar, light emitting diode (LED) and electronics industries. The Company operates in three segments: its polysilicon business, its photovoltaic (PV), business and its sapphire business. The Company's principal products are Silicon Deposition Reactors (SDR) and related equipment used to produce polysilicon, the key raw material used in silicon-based solar wafers and cells; Advanced sapphire crystallization furnaces (ASF) which are used to crystallize sapphire boules, and Directional solidification (DSS) furnaces and related equipment used to cast multicrystalline and MonoCast crystalline silicon ingots. On January 7, 2013, the Company announced the idling of its HiCz pilot manufacturing facility in Hazelwood, Missouri. On November 8, 2012, the Company acquired certain assets of Twin Creeks Technologies, Inc. (Twin Creeks). In May 2013, the Company acquired the business of Thermal Technology LLC.
PV Business
The focus of the Company's PV business is the development, manufacture and sales of crystallization growth furnaces to produce silicon ingots used in the production of solar wafers. The Company's principal product line has been the DSS family of casting furnaces that are used to produce multicrystalline ingots and MonoCast ingots. As of December 31, 2012, the Company shipped approximately 3,300 DSS crystallization furnaces. The ingots are used to make photovoltaic (PV) solar wafers and cells. HiCz, or continuous Czochralski (Cz) growth process, produces monocrystalline ingots that are designed to produce more efficient wafers. The Company�� DSS furnace is a specialized furnace used to melt polysilicon and cast multicrystalline ingots. Multicrystalline ingots are used to produce solar wafers, which ultimately become solar cells. The Company markets its DSS crystallization furnaces under the names DSS450HP and DSS6! 50. The Company's largest capacity DSS furnace, the DSS650, is capable of producing ingots that weigh up to 650 kilograms using standard silicon feedstock. In January 2012, the Company introduced its MonoCast silicon casting technology that uses the DSS furnace architecture to produce ingots comprised of a high percentage of monocrystalline material. The Company is markets MonoCast technology under the name DSS450 MonoCast.
The Company�� ancillary equipment provides operators with material handling assistance during the preparation of the crucible before it is loaded with silicon and during the loading and unloading of the crucible into the DSS furnace chamber at the start of the growth process and out of the DSS furnace chamber at the conclusion of the ingot growth process. The Company's ancillary equipment includes crucible coating stations, crucible manipulators, loaders/unloaders, extraction tools and other material handling systems required to safely transport material during the ingot growth process. The Company sells replacement parts and consumables used in its DSS furnaces and other PV equipment.
Polysilicon Business
The Company's polysilicon business offers Silicon Deposition Reactors, which utilize the chemical vapor deposition process, and related trichlorosilane (TCS) technology and equipment along with engineering services to existing polysilicon producers and new market entrants. The Company's polysilicon business focuses on product design, quality control, engineering services, project management and process development related to the production of polysilicon. It markets its SDR reactors under the names SDR300, SDR400, SDR 500 and SDR 600. The Company provides equipment, technology and engineering services for the production and purification of TCSand silane. This hydrochlorination technology eliminates the need for silicon tetrachloride converters which are required when using certain other polysilicon production technology. The Company also pr! ovides an! cillary equipment and technologies for producing seed rods used in its SDR reactors and for handling and processing the polysilicon rods into a finished product.
Sapphire Business
The Company's sapphire business markets and sells of the Company's ASF systems to customers to enable them to produce sapphire material. The Company also produces sapphire material, on a limited basis, for the LED and other specialty markets at its sapphire pilot production facility in Massachusetts. Its ASF systems produce monocrystalline sapphire material, referred to as sapphire boules. The sapphire boules are used to make sapphire wafers, a substrate for manufacturing LEDs, as well as sapphire blanks and windows for such applications as medical devices and watch crystals. The Company's ASF technology is based on the heat exchanger method (HEM), which is a directional solidification technique, which crystallizes the sapphire meltstock material during the growth process. The Company also uses the facility as a research and development (R&D) center to test new technology developments prior to commercial release. The Company markets and sells its ASF systems under the name ASF100. The Company also provides engineering and product design, quality control, process engineering, engineering services and field services related to the operation of its ASF furnaces. The Company produces sapphire material on a limited basis at its pilot production facility in Massachusetts. The Company sells this material to customers in the LED and other markets, such as the aerospace, defenses and medical device.
The Company manufactures and sells two principal types of sapphire materials: hems Sapphire Material and Titanium-doped Sapphire (Ti:Sapphire) Material. Using the material derives from the sapphire boule generated with its ASF furnaces, the Company cut the sapphire material in a number of different dimensions and crystal orientations, in form factors such as cores, rods, blanks, windows and tubes. The! Company ! generates sapphire boules that are doped with titanium. The Company provides certain finishing and polishing for its Ti:Sapphire material.
The Company competes with ALD Vacuum Technologies AG, JYT Corporation, Ferrotec Corporation, PVA TePla AG, Centrotherm Elektrische Anlagen GmbH & Co., Jing Gong Technology, Zhejiang Jingsheng Mechanical & Electrical Co., Ltd, MSA Apparatus Construction for Chemical Equipment Ltd, Centrotherm Elektrische Anlagen GmbH & Co., Morimatsu Industry Co. Ltd., Poly Plant Project, Inc., Hemlock Semiconductor Corporation, Wacker Chemie AG, MEMC Electronic Materials, Inc., Renewable Energy Corporation ASA, Thermal Technology LLC, Advanced Renewable Energy Company, LLC, Rubicon Technology, Inc., Sapphire Technology Co. Ltd. (Korea), Kyocera International Inc., Saint-Gobain, Gavish Inc., and Monocrystal.
Advisors' Opinion:- [By Travis Hoium]
After years of growing along with the solar market,�GT Advanced Technologies (NASDAQ: GTAT ) is experiencing the same downturn solar has. To make matters worse, the company's huge investment in sapphire has also run into excess supply and falling prices, causing a drop in sales there, as well.
- [By Rich Bieglmeier]
Overall: If Stephen Chin is correct that GT Advanced Technologies Inc. (GTAT) sapphire business is at an inflection point, then $10 could prove to be conservative 12-to-18 months from now.
No comments:
Post a Comment